MakerSpace Fall 2020 Assignments
- Instructor
- Marzieh Nikkhah
- Term
- 2020-2021 School Year
- Department
- Architecture
- Description
-
Join Zoom Meeting https://us04web.zoom.us/j/74232251364?pwd=Z2VNcmxCY0pDY2F4SDJtc3hQVE04dz09 Meeting ID: 742 3225 1364 Passcode: gGZJb2
Upcoming Assignments
No upcoming assignments.
Past Assignments
Due:
There is an unfolded box pattern posted here. Draw it on a piece of paper (or preferably construction paper or cardboard, etc. if you have access to) then fold and complete the box. The reason I chose this is to practice concept of turning Ortho (2D surfaces) to an Iso (a 3 D object which in this case it is a box).
Then you will write a note for the person of your choice to wish them a good holiday (Christmas, Hanuka, New Year or just to say you are thinking of them and wish them well), put the note inside the box and gift it to them ...
If you would like to be more creative, you can draw or paint on the box, or even write your note on the box itself ...
The only pattern that I provided is the pattern for the box, everything else is up to you and your level of creativity ... You can also use a more complicated pattern of a box if you are interested in a more challenging work ...
This is due by next Thursday (Dec 10th)
Then you will write a note for the person of your choice to wish them a good holiday (Christmas, Hanuka, New Year or just to say you are thinking of them and wish them well), put the note inside the box and gift it to them ...
If you would like to be more creative, you can draw or paint on the box, or even write your note on the box itself ...
The only pattern that I provided is the pattern for the box, everything else is up to you and your level of creativity ... You can also use a more complicated pattern of a box if you are interested in a more challenging work ...
This is due by next Thursday (Dec 10th)
Due:
Choose 5 objects in your household, and draw the 3 Orthographic views of each of them.
This project is due after Thanksgiving break. We will go over them on Dec 1st and Dec 3rd.
The 3 Ortho projection for each object has 1 point, so total of 15 drawings = Total of 5 points
This project is due after Thanksgiving break. We will go over them on Dec 1st and Dec 3rd.
The 3 Ortho projection for each object has 1 point, so total of 15 drawings = Total of 5 points
Due:
Draw the following Volume in Isometric view (3D view with 30 degree angle above the horizon line), then draw all 3 of the 2D Orthographic views (Top view, Front view and Side view). Pay attention to Hidden Lines and add them wherever they are needed.
You should submit total of 4 drawings. You will receive 1 Point for the Isometric view and 1 Point for the 3 Ortho Views
You should submit total of 4 drawings. You will receive 1 Point for the Isometric view and 1 Point for the 3 Ortho Views
Due:
Draw the following Volume in Isometric view (3D view with 30 degree angle above the horizon line), then draw all 3 of the 2D Orthographic views (Top view, Front view and Side view). Pay attention to Hidden Lines and add them wherever they are needed.
You should submit total of 4 drawings. You will receive 1 Point for the Isometric view and 1 Point for the 3 Ortho Views
You should submit total of 4 drawings. You will receive 1 Point for the Isometric view and 1 Point for the 3 Ortho Views
Due:
Draw the following Volume in Isometric view (3D view with 30 degree angle above the horizon line), then draw all 3 of the 2D Orthographic views (Top view, Front view and Side view). Pay attention to Hidden Lines and add them wherever they are needed.
You should submit total of 4 drawings. You will receive 1 Point for the Isometric view and 1 Point for the 3 Ortho Views
You should submit total of 4 drawings. You will receive 1 Point for the Isometric view and 1 Point for the 3 Ortho Views
Due:
There are 2 pages of ruler reading questions, labeled from A to P
On the Google doc that is editable, write down the response for each question and submit.
Pay attention to the fractions of an inch, also pay attention to where exactly the arrow is landing on the tape measure/ruler
Each question has .25 point, so the total for the test is 4 Points
On the Google doc that is editable, write down the response for each question and submit.
Pay attention to the fractions of an inch, also pay attention to where exactly the arrow is landing on the tape measure/ruler
Each question has .25 point, so the total for the test is 4 Points
Due:
There are 2 pages of ruler reading questions, labeled from A to P
On the Google doc that is editable, write down the response for each question and submit.
Pay attention to the fractions of an inch and also pay attention to where exactly the arrow is landing on the tape measure/ruler
Each question has .25 point, so the total for the test is 4 Points
On the Google doc that is editable, write down the response for each question and submit.
Pay attention to the fractions of an inch and also pay attention to where exactly the arrow is landing on the tape measure/ruler
Each question has .25 point, so the total for the test is 4 Points
Due:
Following the rules of 2 Point Perspective drawing (step by step with the video) draw this desk.
The drawing is due on Thursday Sep. 10th
The drawing is due on Thursday Sep. 10th
Due:
Follow the video step by step and draw this hallway in 1 Point Perspective.
https://www.youtube.com/watch?v=0ICyLN6I2cY&t=454s
This drawing is due on Thursday
https://www.youtube.com/watch?v=0ICyLN6I2cY&t=454s
This drawing is due on Thursday
Due:
Draw all the elements in this drawing with respect to 1 point perspective rules ... Follow the video step by step
You will grade yourself on Thursday based on the ACE universal rubric
https://www.youtube.com/watch?v=XRrKohWdpeQ
You will grade yourself on Thursday based on the ACE universal rubric
https://www.youtube.com/watch?v=XRrKohWdpeQ
Due:
https://www.youtube.com/watch?v=GVKSVMsWXrI&list=PL-VhIruSKsZnqHSkCUYrpW5KQveQlVTwi&index=11&t=40s